Semi-synthetic Sawing Fluid
LENOX AEROMAX™ SAWING FLUID
Semi-synthetic sawing fluid for extreme performance in all materials
FOR USE IN AEROSPACE INDUSTRY
Formulated with components that are free of sulfur and chlorine
VERSATILITY
High oil semi-synthetic design for a wide range of materials, especially cast iron and hard high-temperature resistant materials
| SAWING FLUID TYPE | CONTAINER SIZE | CHLORINATED | HIGH PRESSURE FOAM CONTROL | |
|---|---|---|---|---|
| LXBSAM5G | SEMI-SYNTHETIC | 5G | NO | NO |
| LXBSAM55G | SEMI-SYNTHETIC | 55G | NO | NO |
| LXBSAM275G | SEMI-SYNTHETIC | 275G | NO | NO |
Applications
Primary
Aluminum
Cast Aluminum
Stainless Steel
High Nickel Alloys
Titanium
Secondary
Cast Iron
Steel
Spray Applications
| PRODUCTS | WATER HARDNESS RANGE |
REFRACTO-METER METER RANGE |
CHLORINATED | WORKING PH | VISCOSITY (SUS) AT 100℉ |
FLASH POINT ℉ | FREEZE POINT ℉ |
BOILING POINT ℉ |
|---|---|---|---|---|---|---|---|---|
| LENOX LUBE® | NA | 1.6-5.6 | No | 8.3 | 145 | NA | <32 | >212 |
| C/Al™ Lubricant | NA | NA | No | NA | 90 | >300 | <32 | NA |
| LENOX Protool Lube® | NA | NA | No | 7.9 | 195 | NA | <28 | >212 |
Flood Applications
| PRODUCTS | WATER HARDNESS RANGE |
REFRACTO-METER METER RANGE |
CHLORINATED | WORKING PH | VISCOSITY (SUS) AT 100F |
FLASH POINT ℉ | FREEZE POINT ℉ |
BOILING POINT ℉ |
|---|---|---|---|---|---|---|---|---|
| BAND-ADE® | < 300 | 1.6-5.6 | No | 9 | 450 | NA | < 32 | >212 |
| BAND-ADE® Fabricator | < 300 | 1.5-5.4 | No | 9.4 | NA | NA | < 32 | >212 |
| LENOX® 100F ™ | < 400 | 2.4-8.4 | No | 9.2 | 450 | NA | <26 | >212 |
| LENOX® HP™ | < 400 | 4..8-16.7 | Yes | 9 | 500 | NA | <13 | >212 |
| LENOX® AeroMax™ | < 300 | 4-13.9 | No | 9.4 | 40 | NA | <5 | >212 |
Cleaner
| PRODUCTS | WATER HARDNESS RANGE |
REFRACTO-METER METER RANGE |
CHLORINATED | WORKING PH | VISCOSITY (SUS) AT 100F |
FLASH POINT ℉ | FREEZE POINT ℉ |
BOILING POINT ℉ |
|---|---|---|---|---|---|---|---|---|
| MACHINE CLEANER | < 300 | 1.7-6 | No | 10 | 40 | NA | < 18 | > 212 |
Spray Applications
| PRODUCTS | CAST IRON | STEEL | HEAT TREAT STEEL/STAINLESS STEEL | ALUMINUM | CAST ALUMINUM | HIGH NICKEL ALLOYS | TITANIUM |
|---|---|---|---|---|---|---|---|
| LENOX LUBE® | Good | Better | Good | Good | Good | Good | Good |
| C/Al™ Lubricant | Good | Good | Good | Good | Good | Good | Good |
| LENOX® Protool Lube | Good | Good | Good | Good | Good | Good | Good |
Flood Applications
| PRODUCTS | CAST IRON | STEEL | HEAT TREAT STEEL/STAINLESS STEEL | ALUMINUM | CAST ALUMINUM | HIGH NICKEL ALLOYS | TITANIUM |
|---|---|---|---|---|---|---|---|
| BAND-ADE® | Good | Good | Good | Excellent | Excellent | Good | Not Recommended |
| BAND-ADE® Fabricator | Good | Good | Good | Good | Good | Good | Not Recommended |
| LENOX® 100F ™ | Good | Good | Good | Better | Excellent | Good | Not Recommended |
| LENOX® HP™ | Good | Better | Excellent | Good | Good | Good | Better |
| LENOX® AeroMax™ | Good | Better | Excellent | Excellent | Excellent | Excellent | Excellent |
CONNECT WITH US FOR ADDITIONAL INFORMATION
LENOX ADVANTAGE
Let the LENOX Advantage team help increase production efficiency across your entire operation to save you more time and money.
FIND THE RIGHT BLADE
SAWCALC is a state-of-the-art, cut calculator application that matches your unique cutting needs with the perfect Lenox blade—making sure you get the job done right, cut after cut.